PRODUCT PARAMETERS
Product Name | Pipe Tee |
Size | 1/2"-24" seamless, 26"-110" welded |
Standard | ANSI B16.9, EN10253-2, DIN2615, GOST17376, JIS B2313, MSS SP 75, customized, etc. |
Wall thickness | SCH5S, SCH10, SCH10S ,STD, XS, SCH40S, SCH80S, SCH20,SCH30,SCH40, SCH60, SCH80, SCH160, XXS ,customized and etc. |
Type | equal/straight, unequal/reducing/reduced |
Special type | Split tee, barred tee, lateral tee and customized |
End | Bevel end/BE/buttweld |
Surface | pickled, sand rolling, polished, mirror polishing and etc. |
Material | Stainless steel: A403 WP304/304L, A403 WP316/316L, A403 WP321, A403 WP310S, A403 WP347H, A403 WP316Ti, A403 WP317, 904L, 1.4301,1.4307,1.4401,1.4571,1.4541, 254Mo and etc. |
Duplex stainless steel: UNS31803, SAF2205, UNS32205, UNS31500, UNS32750 , UNS32760, 1.4462,1.4410,1.4501 and etc. | |
Nickel alloy: inconel600, inconel625, inconel690, incoloy800, incoloy 825, incoloy 800H, C22, C-276,Monel400, Alloy20 etc. | |
Application | Petrochemical industry;aviation and aerospace industry;pharmaceutical industry,gas exhaust; power plant;ship building; water treatment, etc. |
Advantages | ready stock,faster delivery time;available in all sizes,customized;high quality |
TEE INTRODUCTION
Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main line. It is a short piece of pipe with a lateral outlet. Pipe Tee is used to connect pipelines with a pipe at a right angle with the line. Pipe Tees are widely used as pipe fittings. They are made of various materials and available in various sizes and finishes. Pipe tees are extensively used in pipeline networks to transport two-phase fluid mixtures.
TEE TYPE
- There are straight pipe tees which have the same size openings.
- Reducing pipe tees have one opening of different size and two openings of the same size.
-
DIMENSIONAL TOLERANCES OF ASME B16.9 STRAIGHT TEES
Nominal Pipe Size 1/2 to 2.1/2 3 to 3.1/2 4 5 to 8 10 to 18 20 to 24 26 to 30 32 to 48 Outside Dia
at Bevel (D)+1.6
-0.81.6 1.6 +2.4
-1.6+4
-3.2+6.4
-4.8+6.4
-4.8+6.4
-4.8Inside Dia at End 0.8 1.6 1.6 1.6 3.2 4.8 +6.4
-4.8+6.4
-4.8Center to End (C / M) 2 2 2 2 2 2 3 5 Wall Thk (t) Not less than 87.5% of Nominal Wall Thickness
DETAILED PHOTOS
1. Bevel end as per ANSI B16.25.
2. Rough polish first before sand rolling, then the surface will be much smooth
3. Without lamination and cracks
4. Without any weld repairs
5. Surface treatment can be pickled, sand rolling, matt finished, mirror polished. For sure, the price is different. For your reference, sand rolling surface is the most popular. The price for sand roll is suitable for most clients.
MARKING
Various marking work can be on your request. We accept mark your LOGO.
INSPECTION
1. Dimension measurements, all within standard tolerance.
2. Thickness tolerance:+/-12.5% , or on your request
3. PMI
4. PT, UT,X-ray test
5. Accept Third party inspection
6. Supply MTC, EN10204 3.1/3.2 certificate, NACE
7. ASTM A262 practice E
PACKAGING & SHIPPING
1. Packed by plywood case or plywood pallet as per ISPM15
2. we will put packing list on each package
3. we will put shipping markings on each package. Markings words are on your request.
4. All wood package materials are fumigation free
Detailed photos
1. Bevel end as per ANSI B16.25.
2. Rough polish first before sand rolling, then the surface will be much smooth
3. Without lamination and cracks
4. Without any weld repairs
5. Surface treatment can be pickled, sand rolling, matt finished, mirror polished. For sure, the price is different. For your reference, sand rolling surface is the most popular. The price for sand roll is suitable for most clients.
Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main line. It is a short piece of pipe with a lateral outlet. Pipe Tee is used to connect pipelines with a pipe at a right angle with the line. Pipe Tees are widely used as pipe fittings. They are made of various materials and available in various sizes and finishes. Pipe tees are extensively used in pipeline networks to transport two-phase fluid mixtures.
DIMENSIONAL TOLERANCES OF ASME B16.9 STRAIGHT TEES
Nominal Pipe Size | 1/2 to 2.1/2 | 3 to 3.1/2 | 4 | 5 to 8 | 10 to 18 | 20 to 24 | 26 to 30 | 32 to 48 |
Outside Dia at Bevel (D) |
+1.6 -0.8 |
1.6 | 1.6 | +2.4 -1.6 |
+4 -3.2 |
+6.4 -4.8 |
+6.4 -4.8 |
+6.4 -4.8 |
Inside Dia at End | 0.8 | 1.6 | 1.6 | 1.6 | 3.2 | 4.8 | +6.4 -4.8 |
+6.4 -4.8 |
Center to End (C / M) | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 5 |
Wall Thk (t) | Not less than 87.5% of Nominal Wall Thickness |
Dimensional tolerances are in millimeters unless otherwise indicated and are equal ± except as noted.
Marking
Various marking work can be on your request. We accept mark your LOGO.
Inspection
1. Dimension measurements, all within standard tolerance.
2. Thickness tolerance:+/-12.5% , or on your request
3. PMI
4. PT, UT,X-ray test
5. Accept Third party inspection
6. Supply MTC, EN10204 3.1/3.2 certificate, NACE
7. ASTM A262 practice E
Packaging & Shipping
1. Packed by plywood case or plywood pallet as per ISPM15
2. we will put packing list on each package
3. we will put shipping markings on each package. Markings words are on your request.
4. All wood package materials are fumigation free