SPECIFICATION
| Porduct Name | Slip on flange |
| Size | 1/2"-110" |
| Pressure | 150#-2500#,PN0.6-PN400,5K-40K,API 2000-15000 |
| Standard | ANSI B16.5,EN1092-1, SABA1123, JIS B2220, DIN, GOST,UNI,AS2129, API 6A, etc. |
| Wall thickness | SCH5S, SCH10S, SCH10, SCH40S,STD, XS, XXS, SCH20,SCH30,SCH40, SCH60, SCH80, SCH160, XXS and etc. |
| Material | Stainless steel: A182F304/304L, A182 F316/316L, A182F321, A182F310S, A182F347H, A182F316Ti, 317/317L, 904L, 1.4301, 1.4307, 1.4401, 1.4571,1.4541, 254Mo and etc. |
| Carbon steel: A105, A350LF2, S235Jr, S275Jr, St37, St45.8, A42CP, A48CP, E24 , A515 Gr60, A515 Gr 70 etc. | |
| Duplex stainless steel: UNS31803, SAF2205, UNS32205, UNS31500, UNS32750 , UNS32760, 1.4462,1.4410,1.4501 and etc. | |
| Pipeline steel: A694 F42, A694F52, A694 F60, A694 F65, A694 F70, A694 F80 etc. | |
| Nickel alloy: inconel600, inconel625, inconel690, incoloy800, incoloy 825, incoloy 800H,C22, C-276, Monel400, Alloy20 etc. | |
| Cr-Mo alloy: A182F11, A182F5, A182F22, A182F91, A182F9, 16mo3,15Crmo, etc. | |
| Application | Petrochemical industry, aerospace industry;pharmaceutical industry;gas exhaust;power plant;ship building;water treatment,etc. |
| Advantages | ready stock,faster delivery time;available in all sizes,customized;high quality |
DIMENSION STANDARDS
PRODUCTION DETAIL SHOW
1. Face
Can be raised face(RF), full face(FF), Ring joint(RTJ) , Groove, Tongue, or customized.
2. Slip on with hub, flat welding. Also can offer slip on without hub.
3. CNC fine finished
Face finish: The finish on the face of flange is measured as an Arithmetical Average Roughness Height(AARH). The finish is determined by the standard used. For example, ANSI B16.5 specifies face finishes within a range 125AARH-500AARH(3.2Ra to 12.5Ra). Other finishes are available on requst, for example 1.6 Ra max,1.6/3.2 Ra, 3.2/6.3Ra or 6.3/12.5Ra. The range 3.2/6.3Ra is most common.
MARKING AND PACKING
• Each layer use plastic film to protect the surface
• For all stainless steel are packed by plywood case. For bigger size carbon flange are packed by plywood pallet. Or can be customized packing.
• Shipping mark can make on request
• Markings on products can be carved or printed. OEM is accepted.
INSPECTION
• UT test
• PT test
• MT test
• Dimension test
Before delivery, our QC team will arrange NDT test and dimension inspection.Also accept TPI(third party inspection).
COOPERATION CASE
A project from Thailand, 24” slip on flanges are used in Municipal Engineering.
Products detail show
1. Face
Can be raised face(RF), full face(FF), Ring joint(RTJ) , Groove, Tongue, or customized.
2. Slip on with hub, flat welding. Also can offer slip on without hub.
3. CNC fine finished
Face finish: The finish on the face of flange is measured as an Arithmetical Average Roughness Height(AARH). The finish is determined by the standard used. For example, ANSI B16.5 specifies face finishes within a range 125AARH-500AARH(3.2Ra to 12.5Ra). Other finishes are available on requst, for example 1.6 Ra max,1.6/3.2 Ra, 3.2/6.3Ra or 6.3/12.5Ra. The range 3.2/6.3Ra is most common.
Marking and packing
• Each layer use plastic film to protect the surface
• For all stainless steel are packed by plywood case. For bigger size carbon flange are packed by plywood pallet. Or can be customized packing.
• Shipping mark can make on request
• Markings on products can be carved or printed. OEM is accepted.
Inspection
• UT test
• PT test
• MT test
• Dimension test
Before delivery, our QC team will arrange NDT test and dimension inspection.Also accept TPI(third party inspection).
Cooperation Case
A project from Thailand, 24” slip on flanges are used in Municipal Engineering.
-
WN ANSI B16.36 orifice weld neck flange with ja...
-
DIN ANSI 150LB PN16 stainless steel 304 316 316...
-
forged asme b16.36 wn orifice flange with Jack ...
-
A105 150lb Dn150 carbon steel welding slip on f...
-
Stainless Steel 304 304L 316 316L ASTM forged t...
-
Screw BSP DIN PN 10/16 carbon steel A105 flange...